Colorado Well Data › Washington County
Washington County, Colorado: well depth, water level & drilling cost
✓ 5,064 DWR records · verified 2026-08-14
How deep are wells in Washington County, Colorado?
The median drilled well depth in Washington County is 100 ft, based on 3,674 wells with recorded depths in the state DWR database. Half of all wells fall between 60 ft and 211 ft; 90% are shallower than 302 ft. Wells drilled since 2016 have a median depth of 130 ft.
How much does it cost to drill a well in Washington County?
Applying published per-foot rates to the local median depth of 130 ft: drilling and casing alone typically runs $3,250–$8,450; a complete system including pump, pressure tank, and hookup typically runs $7,800–$13,000. Actual quotes depend on site access, geology, and casing requirements.
Free for property owners. We route your request only to licensed drillers who actually file well logs in Washington County — never sold elsewhere.
What is the static water level in Washington County?
The median static water level is 88 ft below ground surface (middle half of wells: 28 ft–175 ft), from 273 measurements.
How much water do wells in Washington County produce?
The median tested yield is 15 gpm (middle half: 10 gpm–20 gpm), from 875 pump tests. A typical household needs 5–10 gpm.
Pull every recorded well near a Washington County address — $29
Drilled depth distribution
Who drills wells in Washington County?
Companies by number of wells permitted in this county, per well construction reports filed with the Colorado Division of Water Resources. Permits recorded without a licensed driller (owner-built, or approved by a professional engineer) are excluded.
| Driller | Wells since 2016 |
|---|---|
| Newbanks Pump Inc. | 72 |
| Hamacher Well Works Inc | 25 |
| Wellstone Services LLC | 23 |
| Wellstone Services, LLC | 16 |
| Canfield Drilling | 14 |
| M&S Drilling, Inc. | 11 |
| Schaal Drilling | 7 |
| Schaal Drilling Ltd LLC | 6 |
See every driller with wells on record in Washington County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $29Method: medians computed from DWR records (DWR well permits, applications that were denied, withdrawn, cancelled or are still pending excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.