⟁ Colorado Well Data field records · 2026 survey

Colorado Well Data › El Paso County › Ramah (80832)

Ramah, CO (80832): well depth, water level & drilling cost

✓ 1,408 DWR records · El Paso County

300 ftmedian well depth
146 ft–440 fttypical depth range
175 ftmedian static water level
10 gpmmedian yield (623 tests)

Pull every recorded well near a Ramah (80832) address — $49

How deep are wells in and around Ramah (80832), Colorado?

The median drilled well depth in and around Ramah (80832) is 300 ft, based on 1,012 wells with recorded depths in the state DWR database. Half fall between 146 ft and 440 ft; 90% are shallower than 580 ft.

How much does it cost to drill a well in and around Ramah (80832)?

Applying published per-foot rates to the local median depth of 300 ft: drilling and casing alone typically runs $7,500–$19,500; a complete system including pump, pressure tank, and hookup typically runs $18,000–$30,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Ramah (80832)?

The median static water level is 175 ft below ground surface (middle half of wells: 120 ft–224 ft), from 143 measurements.

Drilled depth distribution

0–50 ft 38 50–100 ft 119 100–150 ft 101 150–200 ft 72 200–300 ft 156 300–400 ft 188 400–600 ft 245 600+ ft 93
Looking at a specific property in Ramah (80832)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Ramah (80832)

Free. Goes to licensed drillers working El Paso County.

Part of El Paso County well records.

Method: medians computed from DWR records (DWR well permits, applications that were denied, withdrawn, cancelled or are still pending excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.